Preliminary Study of the Feasibility of a Webcam as a Measuring Tool for Product Geometry (Circular Object Case Study)

Penulis

  • Erina Primayanti Universitas Islam Indonesia Yogyakarta

DOI:

https://doi.org/10.35335/mekintek.v13i2.179

Kata Kunci:

webcams, geometry measurement, imaging 21), PCs, software webcams, matlab software

Abstrak

This final straightforward report discusses the initial feasibility study of a webcam as a product geometry measurement tool (a case study of circular objects). Measurements are obtained from reading the 2D imaging surface of the shooting measuring object. In this test the measurement is focused on measuring the diameter of an object in the form of a circle. The image obtained from the results of formal RGB shooting and displayed on a PC monitor by so/Mere webcam, then called using Matlab software. Imaging is processed from RGB format to gray scale and then to monochrome, then the diameter of the image surface is calculated.

Referensi

Achmad Balza, Directorate of Image Processing Engineering Courses. Department of Nuclear Engineering, Faculty of Engineering, Gadjah Mada University, Yogyakarta, 2001.

Castleman, Kenneth R., Digital Image Processing, Prentice Hall International, Inc., Englewood Cliffs, New Jersey, 1996.

Gonzalez, Rafael C. and Woods, Richard E., Digital Image Processing. Prentice Hall Inc., New Jersey, 2001.

Giwanda Griand, A Practical Guide to Digital Photography, Puspa Skilled, Jakarta, 2004.

Jain, Anil K., Fundamentals of Digital Image Processing, Prentice Hall of India, New Delhi, 1995.

Muhaimin, DRS, MT, Lighting Technology, Refika Aditama. Bandung, 2001.

Munir Rinaldi, Digital Image Processing with an Algorithmic Approach, Bandung Informatics, Bandung, 2004.

Rochim Taufiq and Wirdjomartono, Sri Hardjoko, Industrial Metrology Geometric Specifications and Quality Control, Department of Production Engineering and Industrial Metrology, Department of Machinery, Faculty of Industrial Technology, Bandung Institute of Technology, Bandung, 1985

Unduhan

Diterbitkan

2022-12-30

Cara Mengutip

Primayanti, E. (2022). Preliminary Study of the Feasibility of a Webcam as a Measuring Tool for Product Geometry (Circular Object Case Study). Jurnal Mekintek : Jurnal Mekanikal, Energi, Industri, Dan Teknologi, 13(2), 100–105. https://doi.org/10.35335/mekintek.v13i2.179

Terbitan

Vol 13 No 2 (2022): October: Mechanical, Energy, Industrial And Technology

Bagian

Articles

Lisensi

Hak Cipta (c) 2022 Erina Primayanti

Creative Commons License

Artikel ini berlisensi Creative Commons Attribution-NonCommercial 4.0 International License.